EVO CAST - SPEED ( Epoxy Resin)

EVO CAST - SPEED ( Epoxy Resin ) - Only ship to Singapore addresses 
 
✿SIZE✿

▲ 200G ( PART A : 100G , PART B : 100G) - SGD $29.90
▲ 500G ( PART A : 250G , PART B : 250G) - SGD $39.90
▲ 1600G ( PART A : 800G , PART B : 800G) - SGD $89.90


* PART A IS NOT AS CLEAR AS PART B, but once the resin is thoroughly mixed, the resin will clear up.

----------------------------------------

✿USAGE✿

▲ This resin is a two-part epoxy casting resin with a convenient ratio of 1:1 that cures fast.
( Fast curing - can demould in approx. 10 hrs)

▲ It is ideal for small / shallow casting projects that required a shorter cure time.
( Recommended For : Clear Casting Jewellery Making , small trinket trays etc)

▲ It also works great as a coating layer on polymer clay . (Minimum shrinkage)

----------------------------------------

✿INFORMATION CHART✿

▲ MIX RATIO - 1 : 1 ( BY VOLUME)
                          1 : 1.1 (BY WEIGHT)

* Strongly recommended to measure by vol. for more accurate mixing.


▲ WORKING TEMP - 25 DEGREE CELSIUS

▲ POT LIFE (WORK TIME) - 30 MINUTES. ( Depends on mixed vol.)

▲ CURE TIME : DEMOULD - 10HRS ( APPROX.)
                                                 HARD CURE - 14- 20HRS
                                                 FULL CURE - 3-5DAYS

▲ VISCOSITY - LOW VISCOSITY

▲ HARDNESS - CURES STRONG AND HARD

▲ BUBBLES - LOW OR ZERO BUBBLES WHEN CASTING.

▲ SHELF LIFE - 12 MONTHS (UNOPENED)
                            6 MONTHS ( OPENED)

▲ FOOD SAFE - NO

▲ TOXICITY - NON - TOXIC , NO VOCs

▲ HEAT RESISTANCE - UP TO 40 DEGREE CELSIUS

----------------------------------------

✿SAFETY NOTICE✿

▲ Always wear personal protective equipment when handling epoxy resin.

▲ Always wear nitrile gloves when handling or mixing the resin and hardener and use a respirator if mixing in a poorly ventilated area.

▲ Adverse allergic reactions can occur If you have sensitive skin so do wear your protective gear.We will not be liable for any damages or allergic reactions caused using our products.


✿ PLEASE NOTE ✿

▲ There are many external factors that can cause the end result to differ from our information chart. External environmental factors like the work temperature can alter how mixed resin performs. The handling and application process of the user also plays a huge role in determining the end result as well. And all these factors are beyond our control,

*We will not issue refunds or compensate for any issues caused due to individual mishandling.*

▲ The average shelf life of epoxy resin is 12 months unopened and 6 months once opened. Once the hardener (PartB) is exposed to air, it will starts to turn yellow or cloudy overtime. Which makes the resin no longer suitable for clear casting, but you can still use colorant to tint the resin for pigmented pour.

* So please buy the amount you need, do not stock up big amount that you don't use. Moving forward, we will not issue any refunds / compensation for any yellowish resin.

▲ There are a lot of technical aspects to be mindful of when it comes to epoxy resin. So if you wish to learn more about the correct handling of resin , it is best to attend one of our resin workshop!

* Do reach out to us if you encounter any issues using our resin!*


▲ AND Resin after all, is plastic. Whatever light they are in, whether it is direct sunlight, indirect light, indoor lighting or, just age - they all have an effect on the pigment of the resin and all - sadly - turn various stages of yellow over time.

(But EVO- Cast resin is the best resin we have ever tested , that does not turn yellow as easily compared to other brands in the
market.)